Linux, XAMPP, Drupal 7

Главные вкладки

Аватар пользователя xSPiRiTx xSPiRiTx 18 мая 2012 в 23:05

на ArchLinux установил и запустил XAMPP 1.7.7 из AUR.
http://localhost работает, выдал веб-морду с выбором языка. после выбора англ. языка попадаю в "Welcome to XAMPP for Linux 1.7.7 !".

наверняка не я один пользуюсь сборкой xampp под linux. Использовать виртуальные хосты нет необходимости...мне не составит труда лишний раз набирать localhost/drupal_site.
кидать файлы нужно в /opt/lampp/htdocs/drupal_site: какие права доступа и конкретно на какие директории лучше давать дабы иметь свободный доступ не от root'а, а также предоставить директорию системе Drupal ибо даже после установки она не в праве создать конфигурационный_файл.php...(джумла так та вообще не могла шаблоны ни удалить, ни отредактировать, не могла ни модуль ни тот же шаблон установить в cms)

Комментарии

Аватар пользователя orb orb 18 мая 2012 в 23:58

"xSPiRiTx" wrote:
кидать файлы нужно в /opt/lampp/htdocs/drupal_site

кидать файлы можно куда угодно Smile
У меня настроено на
/var/www/ — туча разделов, в каждом из них туча сайтов
"xSPiRiTx" wrote:
Использовать виртуальные хосты нет необходимости...мне не составит труда лишний раз набирать localhost/drupal_site

Зря, виртуальные хосты делаются легко и очень удобно (я использую по принципу апач 1.х где виртуальные хосты в одном файле писались)
"xSPiRiTx" wrote:
какие права доступа и конкретно на какие директории лучше давать дабы иметь свободный доступ не от root'а

права установить так как написано на сайте ХАМРР (нужно разархивировать командой как там написано), после этого менять права можно только на папку с сайтами и прописать в конфиге апача что бы запускался с правами вашего юзера

Аватар пользователя voviko voviko 19 мая 2012 в 0:56

по мне так под линухой намного проще поставить сервер (апач пхп. и тд). Делов на пять минут, и гемора нет, и намного проще сервера отлаживать.

Аватар пользователя xSPiRiTx xSPiRiTx 19 мая 2012 в 3:46

"orb" wrote:
кидать файлы можно куда угодно Smile
У меня настроено на
/var/www/

а можно подробнее? нужно просто указать в конфе апача как основную директорию...не помню точно где и какая директива
"orb" wrote:
Зря, виртуальные хосты делаются легко и очень удобно

та можно...там делов на 4 минуты
"orb" wrote:
права установить так как написано на сайте ХАМРР (нужно разархивировать командой как там написано),

это понятно
"orb" wrote:
после этого менять права можно только на папку с сайтами и прописать в конфиге апача что бы запускался с правами вашего юзера

скорее всего эта тема меня и интересует.....это мне и нужно...

Аватар пользователя orb orb 19 мая 2012 в 23:00

Под рукой только конфиг винды.

Этот куксок не трогаем что бы работали страница ХАМРР

DocumentRoot "Путь_куда_установили/xampp/htdocs"
<Directory />
    Options FollowSymLinks
    AllowOverride None
    Order deny,allow
    Deny from all
</Directory>

Там ниже еще кусок тоже не трогаем, с теми же целями.
Ниже вставляем?

<Directory "/var/www">
    Options Indexes FollowSymLinks Includes ExecCGI
    AllowOverride All
    Order allow,deny
    Allow from all
</Directory>
Аватар пользователя xSPiRiTx xSPiRiTx 25 мая 2012 в 22:22

orb wrote:
Под рукой только конфиг винды.

Этот куксок не трогаем что бы работали страница ХАМРР

DocumentRoot "Путь_куда_установили/xampp/htdocs"
<Directory />
    Options FollowSymLinks
    AllowOverride None
    Order deny,allow
    Deny from all
</Directory>

Там ниже еще кусок тоже не трогаем, с теми же целями.
Ниже вставляем?

<Directory "/var/www">
    Options Indexes FollowSymLinks Includes ExecCGI
    AllowOverride All
    Order allow,deny
    Allow from all
</Directory>

это в каком файле?

Аватар пользователя orb orb 19 мая 2012 в 23:01

"xSPiRiTx" wrote:
скорее всего эта тема меня и интересует.

под виндой такого нету, но в том же файле апача задается имя пользователя и группа, которая берется из файлов переменных.
Я затираю имена переменных и ставлю себя, хотя правильнее наверное менять именно в переменных

Аватар пользователя orb orb 19 мая 2012 в 23:02

"voviko" wrote:
по мне так под линухой намного проще поставить сервер (апач пхп. и тд). Делов на пять минут, и гемора нет, и намного проще сервера отлаживать

ну расскажи как за 5 минут поставить РНР 5.2.х

Аватар пользователя voviko voviko 22 мая 2012 в 13:35

"orb" wrote:
ну расскажи как за 5 минут поставить РНР 5.2.х

сначала обновляем список пакетов, потом, желательно, систему, и в терминалу пишем:
yum install apache php5 mysql-server phpmyadmin (под дебиан надо ставить php5-dev для uploadprogress)

если с названием пакетов не ошибся, то localhost уже работает.
вот, почитай http://www.linuxcookbook.ru/yum

смотрим что не хватает drupal и доустанавливаем, настраиваем чистые ссылки (например в файле .htaccess)
А дальше от твоего воображения зависит, можешь править /etc/apache2/sites-лала/твой домен (добавить "локальный" домен)

Аватар пользователя orb orb 22 мая 2012 в 17:22

"voviko" wrote:
сначала обновляем список пакетов, потом, желательно, систему, и в терминалу пишем:
yum install apache php5

вы уверены что будет ставиться именно РНР 5.2.Х, а не РНР 5.3

Аватар пользователя orb orb 22 мая 2012 в 17:23

уже как несколько лет в репозиториях нету РНР5.2.х. По крайней мере в Генто, убунте, дебиане, Минте, Сюсе и многих других

Аватар пользователя orb orb 23 мая 2012 в 9:16

"multpix" wrote:
велика нужда в 5.2 ?
Если работать с Друпал 6, то велика и даже критично иногда.
а в xampp-1.7.1 все нормально, РНР 5.2.х Smile
Скачать можно любую версию, а не только последнюю Wink

Аватар пользователя xSPiRiTx xSPiRiTx 25 мая 2012 в 23:09

Замучал меня этот XAMPP!!!

Вот мой /opt/lampp/etc/httpd.conf

#
# This is the main Apache HTTP server configuration file.  It contains the
# configuration directives that give the server its instructions.
# See <URL:http://httpd.apache.org/docs/2.2> for detailed information.
# In particular, see
# <URL:http://httpd.apache.org/docs/2.2/mod/directives.html>
# for a discussion of each configuration directive.
#
# Do NOT simply read the instructions in here without understanding
# what they do.  They're here only as hints or reminders.  If you are unsure
# consult the online docs. You have been warned.  
#
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path.  If the filenames do *not* begin
# with "/", the value of ServerRoot is prepended -- so "logs/foo.log"
# with ServerRoot set to "/opt/lampp" will be interpreted by the
# server as "/opt/lampp/logs/foo.log".

#
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
#
# Do not add a slash at the end of the directory path.  If you point
# ServerRoot at a non-local disk, be sure to point the LockFile directive
# at a local disk.  If you wish to share the same ServerRoot for multiple
# httpd daemons, you will need to change at least LockFile and PidFile.
#
ServerRoot "/opt/lampp"

#
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, instead of the default. See also the <VirtualHost>
# directive.
#
# Change this to Listen on specific IP addresses as shown below to
# prevent Apache from glomming onto all bound IP addresses.
#
#Listen 12.34.56.78:80
Listen 80

#
# Dynamic Shared Object (DSO) Support
#
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available _before_ they are used.
# Statically compiled modules (those listed by `httpd -l') do not need
# to be loaded here.
#
# Example:
# LoadModule foo_module modules/mod_foo.so
#
LoadModule authn_file_module modules/mod_authn_file.so
LoadModule authn_dbm_module modules/mod_authn_dbm.so
LoadModule authn_anon_module modules/mod_authn_anon.so
LoadModule authn_dbd_module modules/mod_authn_dbd.so
LoadModule authn_default_module modules/mod_authn_default.so
LoadModule authz_host_module modules/mod_authz_host.so
LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
LoadModule authz_user_module modules/mod_authz_user.so
LoadModule authz_dbm_module modules/mod_authz_dbm.so
LoadModule authz_owner_module modules/mod_authz_owner.so
LoadModule authnz_ldap_module modules/mod_authnz_ldap.so
LoadModule authz_default_module modules/mod_authz_default.so
LoadModule auth_basic_module modules/mod_auth_basic.so
LoadModule auth_digest_module modules/mod_auth_digest.so
LoadModule file_cache_module modules/mod_file_cache.so
LoadModule cache_module modules/mod_cache.so
LoadModule disk_cache_module modules/mod_disk_cache.so
LoadModule mem_cache_module modules/mod_mem_cache.so
# mod_dbd doesn't work in Apache 2.2.3: getting always heaps of "glibc detected *** corrupted double-linked list" on shutdown - oswald, 10sep06
#LoadModule dbd_module modules/mod_dbd.so
LoadModule bucketeer_module modules/mod_bucketeer.so
LoadModule dumpio_module modules/mod_dumpio.so
LoadModule echo_module modules/mod_echo.so
LoadModule case_filter_module modules/mod_case_filter.so
LoadModule case_filter_in_module modules/mod_case_filter_in.so
LoadModule ext_filter_module modules/mod_ext_filter.so
LoadModule include_module modules/mod_include.so
LoadModule filter_module modules/mod_filter.so
LoadModule charset_lite_module modules/mod_charset_lite.so
LoadModule deflate_module modules/mod_deflate.so
LoadModule ldap_module modules/mod_ldap.so
LoadModule log_config_module modules/mod_log_config.so
LoadModule logio_module modules/mod_logio.so
LoadModule env_module modules/mod_env.so
LoadModule mime_magic_module modules/mod_mime_magic.so
LoadModule cern_meta_module modules/mod_cern_meta.so
LoadModule expires_module modules/mod_expires.so
LoadModule headers_module modules/mod_headers.so
LoadModule ident_module modules/mod_ident.so
LoadModule usertrack_module modules/mod_usertrack.so
LoadModule unique_id_module modules/mod_unique_id.so
LoadModule setenvif_module modules/mod_setenvif.so
LoadModule proxy_module modules/mod_proxy.so
LoadModule proxy_connect_module modules/mod_proxy_connect.so
LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
LoadModule proxy_http_module modules/mod_proxy_http.so
LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
LoadModule mime_module modules/mod_mime.so
LoadModule dav_module modules/mod_dav.so
LoadModule status_module modules/mod_status.so
LoadModule autoindex_module modules/mod_autoindex.so
LoadModule asis_module modules/mod_asis.so
LoadModule info_module modules/mod_info.so
LoadModule suexec_module modules/mod_suexec.so
LoadModule cgi_module modules/mod_cgi.so
LoadModule cgid_module modules/mod_cgid.so
LoadModule dav_fs_module modules/mod_dav_fs.so
LoadModule vhost_alias_module modules/mod_vhost_alias.so
LoadModule negotiation_module modules/mod_negotiation.so
LoadModule dir_module modules/mod_dir.so
LoadModule imagemap_module modules/mod_imagemap.so
LoadModule actions_module modules/mod_actions.so
LoadModule speling_module modules/mod_speling.so
LoadModule userdir_module modules/mod_userdir.so
LoadModule alias_module modules/mod_alias.so
LoadModule rewrite_module modules/mod_rewrite.so
LoadModule apreq_module modules/mod_apreq2.so
LoadModule ssl_module modules/mod_ssl.so

<IfDefine JUSTTOMAKEAPXSHAPPY>
LoadModule php4_module        modules/libphp4.so
LoadModule php5_module        modules/libphp5.so
</IfDefine>

<IfModule !mpm_winnt_module>
<IfModule !mpm_netware_module>
#
# If you wish httpd to run as a different user or group, you must run
# httpd as root initially and it will switch.  
#
# User/Group: The name (or #number) of the user/group to run httpd as.
# It is usually good practice to create a dedicated user and group for
# running httpd, as with most system services.
#
User admin
# commented out by lampp compatibility check
#Group nogroup
Group users
</IfModule>
</IfModule>

# 'Main' server configuration
#
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition.  These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
#
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
#

#
# ServerAdmin: Your address, where problems with the server should be
# e-mailed.  This address appears on some server-generated pages, such
# as error documents.  e.g. admin@your-domain.com
#
ServerAdmin you@example.com

#
# ServerName gives the name and port that the server uses to identify itself.
# This can often be determined automatically, but we recommend you specify
# it explicitly to prevent problems during startup.
#
# If your host doesn't have a registered DNS name, enter its IP address here.
#
#ServerName www.example.com:80
# XAMPP
ServerName localhost

#
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
#
DocumentRoot "/opt/lampp/htdocs"

#
# Each directory to which Apache has access can be configured with respect
# to which services and features are allowed and/or disabled in that
# directory (and its subdirectories).
#
# First, we configure the "default" to be a very restrictive set of
# features.  
#
<Directory />
    Options FollowSymLinks
    AllowOverride None
    #XAMPP
    #Order deny,allow
    #Deny from all
</Directory>

#
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
#

#
# This should be changed to whatever you set DocumentRoot to.
#
<Directory "/home/admin/www">
    #
    # Possible values for the Options directive are "None", "All",
    # or any combination of:
    #   Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
    #
    # Note that "MultiViews" must be named *explicitly* --- "Options All"
    # doesn't give it to you.
    #
    # The Options directive is both complicated and important.  Please see
    # http://httpd.apache.org/docs/2.2/mod/core.html#options
    # for more information.
    #
    #Options Indexes FollowSymLinks
    # XAMPP
    Options Indexes FollowSymLinks ExecCGI Includes

    #
    # AllowOverride controls what directives may be placed in .htaccess files.
    # It can be "All", "None", or any combination of the keywords:
    #   Options FileInfo AuthConfig Limit
    #
    #AllowOverride None
    # since XAMPP 1.4:
    AllowOverride All

    #
    # Controls who can get stuff from this server.
    #
    Order allow,deny
    Allow from all

</Directory>

#
# DirectoryIndex: sets the file that Apache will serve if a directory
# is requested.
#
<IfModule dir_module>
    #DirectoryIndex index.html
    # XAMPP
    DirectoryIndex index.html index.html.var index.php index.php3 index.php4
</IfModule>

#
# The following lines prevent .htaccess and .htpasswd files from being
# viewed by Web clients.
#
<FilesMatch "^\.ht">
    Order allow,deny
    Deny from all
</FilesMatch>

#
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here.  If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
#
ErrorLog logs/error_log

#
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
#
LogLevel warn

<IfModule log_config_module>
    #
    # The following directives define some format nicknames for use with
    # a CustomLog directive (see below).
    #
    LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
    LogFormat "%h %l %u %t \"%r\" %>s %b" common

    <IfModule logio_module>
      # You need to enable mod_logio.c to use %I and %O
      LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
    </IfModule>

    #
    # The location and format of the access logfile (Common Logfile Format).
    # If you do not define any access logfiles within a <VirtualHost>
    # container, they will be logged here.  Contrariwise, if you *do*
    # define per-<VirtualHost> access logfiles, transactions will be
    # logged therein and *not* in this file.
    #
    CustomLog logs/access_log common

    #
    # If you prefer a logfile with access, agent, and referer information
    # (Combined Logfile Format) you can use the following directive.
    #
    #CustomLog logs/access_log combined
</IfModule>

<IfModule alias_module>
    #
    # Redirect: Allows you to tell clients about documents that used to
    # exist in your server's namespace, but do not anymore. The client
    # will make a new request for the document at its new location.
    # Example:
    # Redirect permanent /foo http://www.example.com/bar

    #
    # Alias: Maps web paths into filesystem paths and is used to
    # access content that does not live under the DocumentRoot.
    # Example:
    # Alias /webpath /full/filesystem/path
    #
    # If you include a trailing / on /webpath then the server will
    # require it to be present in the URL.  You will also likely
    # need to provide a <Directory> section to allow access to
    # the filesystem path.

    #
    # ScriptAlias: This controls which directories contain server scripts.
    # ScriptAliases are essentially the same as Aliases, except that
    # documents in the target directory are treated as applications and
    # run by the server when requested rather than as documents sent to the
    # client.  The same rules about trailing "/" apply to ScriptAlias
    # directives as to Alias.
    #
    ScriptAlias /cgi-bin/ "/opt/lampp/cgi-bin/"

</IfModule>

<IfModule cgid_module>
    #
    # ScriptSock: On threaded servers, designate the path to the UNIX
    # socket used to communicate with the CGI daemon of mod_cgid.
    #
    #Scriptsock logs/cgisock
</IfModule>

#
# "/opt/lampp/cgi-bin" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
#
<Directory "/opt/lampp/cgi-bin">
    AllowOverride None
    Options None
    Order allow,deny
    Allow from all
</Directory>

#
# DefaultType: the default MIME type the server will use for a document
# if it cannot otherwise determine one, such as from filename extensions.
# If your server contains mostly text or HTML documents, "text/plain" is
# a good value.  If most of your content is binary, such as applications
# or images, you may want to use "application/octet-stream" instead to
# keep browsers from trying to display binary files as though they are
# text.
#
DefaultType text/plain

<IfModule mime_module>
    #
    # TypesConfig points to the file containing the list of mappings from
    # filename extension to MIME-type.
    #
    TypesConfig etc/mime.types

    #
    # AddType allows you to add to or override the MIME configuration
    # file specified in TypesConfig for specific file types.
    #
    #AddType application/x-gzip .tgz
    #
    # AddEncoding allows you to have certain browsers uncompress
    # information on the fly. Note: Not all browsers support this.
    #
    #AddEncoding x-compress .Z
    #AddEncoding x-gzip .gz .tgz
    #
    # If the AddEncoding directives above are commented-out, then you
    # probably should define those extensions to indicate media types:
    #
    AddType application/x-compress .Z
    AddType application/x-gzip .gz .tgz

    #
    # AddHandler allows you to map certain file extensions to "handlers":
    # actions unrelated to filetype. These can be either built into the server
    # or added with the Action directive (see below)
    #
    # To use CGI scripts outside of ScriptAliased directories:
    # (You will also need to add "ExecCGI" to the "Options" directive.)
    #
    #AddHandler cgi-script .cgi
    # XAMPP, since LAMPP 0.9.8:
    AddHandler cgi-script .cgi .pl

    # For files that include their own HTTP headers:
    #AddHandler send-as-is asis

    # For server-parsed imagemap files:
    #AddHandler imap-file map

    # For type maps (negotiated resources):
    #AddHandler type-map var

    #
    # Filters allow you to process content before it is sent to the client.
    #
    # To parse .shtml files for server-side includes (SSI):
    # (You will also need to add "Includes" to the "Options" directive.)
    #
    # XAMPP
    AddType text/html .shtml
    AddOutputFilter INCLUDES .shtml
</IfModule>

#
# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type.  The MIMEMagicFile
# directive tells the module where the hint definitions are located.
#
#MIMEMagicFile etc/magic

#
# Customizable error responses come in three flavors:
# 1) plain text 2) local redirects 3) external redirects
#
# Some examples:
#ErrorDocument 500 "The server made a boo boo."
#ErrorDocument 404 /missing.html
#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
#ErrorDocument 402 http://www.example.com/subscription_info.html
#

#
# EnableMMAP and EnableSendfile: On systems that support it,
# memory-mapping or the sendfile syscall is used to deliver
# files.  This usually improves server performance, but must
# be turned off when serving from networked-mounted
# filesystems or if support for these functions is otherwise
# broken on your system.
#
EnableMMAP off
EnableSendfile off

# Supplemental configuration
#
# The configuration files in the etc/extra/ directory can be
# included to add extra features or to modify the default configuration of
# the server, or you may simply copy their contents here and change as
# necessary.

# Server-pool management (MPM specific)
#Include etc/extra/httpd-mpm.conf

# Multi-language error messages
Include etc/extra/httpd-multilang-errordoc.conf

# Fancy directory listings
Include etc/extra/httpd-autoindex.conf

# Language settings
#Include etc/extra/httpd-languages.conf

# User home directories
#Include etc/extra/httpd-userdir.conf

# Real-time info on requests and configuration
#Include etc/extra/httpd-info.conf

# Virtual hosts
Include etc/extra/httpd-vhosts.conf

# Local access to the Apache HTTP Server Manual
#Include etc/extra/httpd-manual.conf

# Distributed authoring and versioning (WebDAV)
#Include etc/extra/httpd-dav.conf

# Various default settings
Include etc/extra/httpd-default.conf

# Secure (SSL/TLS) connections
<IfModule ssl_module>
# XAMPP
<IfDefine SSL>
Include etc/extra/httpd-ssl.conf
</IfDefine>
</IfModule>
#
# Note: The following must must be present to support
#       starting without SSL on platforms with no /dev/random equivalent
#       but a statically compiled-in mod_ssl.
#
<IfModule ssl_module>
SSLRandomSeed startup builtin
SSLRandomSeed connect builtin
</IfModule>

# XAMPP
Include etc/extra/httpd-xampp.conf

вот мой /opt/lampp/etc/extra/httpd-vhosts.conf

#
# Virtual Hosts
#
# If you want to maintain multiple domains/hostnames on your
# machine you can setup VirtualHost containers for them. Most configurations
# use only name-based virtual hosts so the server doesn't need to worry about
# IP addresses. This is indicated by the asterisks in the directives below.
#
# Please see the documentation at
# <URL:http://httpd.apache.org/docs/2.2/vhosts/>
# for further details before you try to setup virtual hosts.
#
# You may use the command line option '-S' to verify your virtual host
# configuration.

#
# Use name-based virtual hosting.
#
NameVirtualHost *:80

#
# VirtualHost example:
# Almost any Apache directive may go into a VirtualHost container.
# The first VirtualHost section is used for all requests that do not
# match a ServerName or ServerAlias in any <VirtualHost> block.
#
<VirtualHost *:80>
   ServerAdmin admin@udf.su
   DocumentRoot /opt/lampp/htdocs
   ServerName localhost
   ErrorLog logs/localhost-error_log
   CustomLog logs/localhost-access_log common
</VirtualHost>

вот мой /etc/hosts

#
# /etc/hosts: static lookup table for host names
#

#<ip-address>   <hostname.domain.org>   <hostname>
127.0.0.1       localhost.localdomain   localhost arch
127.0.0.1       localhost
# End of file

Вообщем заюзал виртуальные хосты по ссылке http://localhost вылазит логотип XAMPP и предлагает выбор языка. При нажатии на English ничего не происходит...просто обновляется страница.
ЧЯДНТ?

Аватар пользователя orb orb 25 мая 2012 в 23:10

"xSPiRiTx" wrote:
ЧЯДНТ?

ты файлы листингами выводишь, пожалей смотрящих ... я пока доскролил, так устал что и помогать не хочется ... пойду пальцам горячую ванну сделаю

Аватар пользователя xSPiRiTx xSPiRiTx 26 мая 2012 в 0:38

оказывается моя беда была в директиве

#
# If you wish httpd to run as a different user or group, you must run
# httpd as root initially and it will switch.  
#
# User/Group: The name (or #number) of the user/group to run httpd as.
# It is usually good practice to create a dedicated user and group for
# running httpd, as with most system services.
#
User admin
# commented out by lampp compatibility check
#Group nogroup
Group users

admin - мое имя, users - группа. Если оставить nobody как было по умолчанию, то все норм

Аватар пользователя xSPiRiTx xSPiRiTx 21 июля 2012 в 6:54

Обновился в Арче xampp до версии 1.8.0, затер какого-то хрена конфиги мудак! хорошо бекапы баз были.

Вообщем решил, что обновляться так ну его в жопу и с офсайта скачал архив и решил полностью переустановить xampp. Все инструкции выполнял как написано на их сайте.
localhost запускается, показует мне Welcome, а при заходе в phpmyadmin высерает:
««Access forbidden!

New XAMPP security concept:

Access to the requested directory is only available from the local network.

This setting can be configured in the file "httpd-xampp.conf".

If you think this is a server error, please contact the webmaster.

Error 403

localhost
Apache/2.4.2 (Unix) OpenSSL/1.0.1c PHP/5.4.4»»

Аватар пользователя orb orb 21 июля 2012 в 10:30

"xSPiRiTx" wrote:
xampp до версии 1.8.0, затер какого-то хрена конфиги мудак!

кто?
Вообще спорный момент и зависит от каких к каким версия происходит обновление и как. Собственно если его локально использовать то зачем вообще обновлять?

Аватар пользователя xSPiRiTx xSPiRiTx 21 июля 2012 в 17:46

вот эти конфиги httpd.conf что мы вверху настраивали xampp обновился из AUR до версии 1.8.0 и затер новыми по-умолчанию!
при старте он насрал, что не может там что-то запустить и типа httpd.conf переинициализировал...точно по словам не помню, что писал, но после этого запуска все пошло по жопе!

Возможно это было связано с тем, что у меня права доступа на /opt/lampp были 777...он ругался на них.

В любом случае я его убрал из системы, поставил новый с официального сайта из архива, настройки вообще не трогал, а он гонит, что доступ в БД и phpmyadmin не разрешен какого-то хера.

Аватар пользователя xSPiRiTx xSPiRiTx 22 июля 2012 в 3:24

Два дня и две ночи мучался и ужасно бесился - ничего не получалось!!! Думал разобью дисплей.

Итог: вернулся на предыдущую версию xampp (1.8.0>>>1.7.7) с предыдущей версией PHP (5.4>>>5.3). На php 5.4 бесился то друпал то sypex dumper, то новую версию phpmyadmin не мог укротить. (Руки то еще короткие у меня)
Помимо этого были замечены проблемы в последней версии на данный момент браузера Chromium. Много тупняков как выясилось позже почему-то ловилось с ним. Один из них - это то, что в phpmyadmin категорически молча не создавались и не удалялись БД. В Firefox 14 все в лучшем виде!

Аватар пользователя orb orb 22 июля 2012 в 11:31

Друпал 6 вообще-то стабильно работает только на РНР 5.2.х, есть много модулей которые на РНР 5.3 будут сыпать варнингами